Yingtai: Freeze Dryer Deep Cleaning Guide

Freeze Dryer Deep Cleaning Guide

Freeze dryer cleaning four-part series

Step 1: Preliminary observation, judgment needs

First of all, through the holes in the No. 1 red box, we can be like a detective, carefully observe whether there is dust inside the freeze dryer "traces". This step is the "reconnaissance" work before cleaning, to help us determine whether we need to immediately carry out deep cleaning.

Step 2: Precise disassembly, to hit the nail on the head

Once we find more dust, we need to dismantle area 2. This step requires patience and care to ensure that the parts that need to be cleaned are precisely disassembled without affecting the rest of the device. The correct order of disassembly and use of tools is the key to protecting the equipment from damage.

Step 3: Brush on, deep cleaning

Next, use a soft brush to clean the disassembled parts in the direction shown by the arrow. The soft texture of the brush can effectively remove dust while avoiding scratches on the surface of the device. The cleaning process can be combined with a vacuum cleaner or compressed air canister to remove loose dust thoroughly.

Step 4: Comprehensive Scrubbing to Restore as New

The final step is to carry out a comprehensive cleaning and scrubbing of the entire freeze dryer. Choose a cleaning cloth made of suitable material and a mild detergent to ensure that there is no residue on the surface and inside of the equipment. Pay special attention to the cold trap, vacuum pump and other key components of the cleaning, these parts are directly related to the freeze drying effect and equipment life.

After the above four steps of careful cleaning, the freeze dryer will be a new look, not only reduces the cold trap temperature, improve efficiency, and more importantly, protects the vacuum pump and other core components, extends the service life of the equipment. At the same time, the cleaned equipment can also effectively reduce the failure rate caused by the accumulation of dust.