I. Common Issues and Troubleshooting for Low-Speed Centrifuges
1. No Power Indicator after Startup:
a) Check if the indoor power supply is normal.
b) Ensure the plug and socket are making good contact.
c) Inspect whether the fuse is blown.
2. Excessive Vibration after Startup:
a) Verify if there is significant weight deviation of the separation liquid when symmetrically loaded into the centrifuge tube.
b) Check if the rotor groove aligns with the motor shaft.
II. Installation of Yingtai Low-Speed Centrifuge Main Unit
1. Site Requirements:
a) The installation tabletop should be sturdy, indoors should be dry, clean, and avoid direct sunlight.
b) There should be an independent ground wire indoors to ensure electrical safety.
2. Installation of Tabletop Low-Speed Centrifuge Main Unit:
a) Securely mount the main unit onto a solid tabletop, ensuring all four feet are in contact with the surface.
b) Maintain a gap of more than 0.1m between the centrifuge and surrounding walls to ensure adequate ventilation.
c) AC power supply of 220V 50Hz, with wire cross-sectional area not less than 2.5 square millimeters, and the protective grounding line must be securely connected.
This website uses cookies and similar technologies (“cookies”). Subject to your consent, will use analytical cookies to track which content interests you, and marketing cookies to display interest-based advertising. We use third-party providers for these measures, who may also use the data for their own purposes.
You give your consent by clicking "Accept all" or by applying your individual settings. Your data may then also be processed in third countries outside the EU, such as the US, which do not have a corresponding level of data protection and where, in particular, access by local authorities may not be effectively prevented. You can revoke your consent with immediate effect at any time. If you click on "Reject all", only strictly necessary cookies will be used.
